Raymarine forum / Raymarine Forums / Autopilots v / Evolution AP not steering to waypoints without getting lost

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Evolution AP not steering to waypoints without getting lost
04-14-16, 06:36 PM
Post: #7
Seacom Offline
Junior Member
**
 		Posts: 12
Joined: Mar 2016
Reputation: 0
RE: Evolution AP not steering to waypoints without getting lost
(04-14-16 03:28 PM)Steve - Raymarine - Moderator Wrote:  The button presses are Menu>Response Level for the Performance/Cruise/Leisure, then Menu>Setup>Autopilot Calibration>Vessel Settings>Speed Input.

I've confirmed that it is indeed set to Cruise. I can not confirm the Speed Input setting however as that is not an option in the screen that you directed me too. Under Vessel Settings the only options in the list are Vessel Hull Type, Drive Type, Compass Offset and Calibration Lock. I have a screenshot of this if you need it. I did find an option to set the Speed under Data Sources (in a list with Heading, Depth, etc) and it had 2 choices for me, Auto and E127 (which is my GPS source from the internal GPS antenna), and the E127 was already selected.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Evolution AP not steering to waypoints without getting lost - Seacom - 04-14-16 06:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication