Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG] Interfacing ST2000+ and i60

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Interfacing ST2000+ and i60
06-27-18, 08:01 AM
Post: #3
markyfff Offline
Junior Member
**
 		Posts: 6
Joined: Jun 2018
Reputation: 0
RE: [DG] Interfacing ST2000+ and i60
Thank you Derek for the quick reply as always on this forum.

Follow up question... If I use the ST2000 socket to power the i60, would the ST2000 have to be plugged in to power the i60 or would it still draw power from the socket without it plugged in? I run the socket to my aux electronics on my panel which I control with a switch. I would sometimes use the i60 without wanting to plug in the ST2000 and just want to make sure I don't need to close the circuit in this way, if that makes sense.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG] Interfacing ST2000+ and i60 - markyfff - 06-27-18 08:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication