[DG] [DG] Interfacing ST2000+ and i60

[garveypeter]

Hi Mark,

I'm installing a similar system with a few more pieces.

STNG network -

i50, depth/speed, i60 wind and i60 close haul, i70, Axiom 9 Pro, St2000+ smart wireless controller.

then

On a NMEA network

AIT3000 digital yacht AIS - NMEA server,
Maretron USB100
Maretron FMP100

I need some guidance on how to connect everything up

All the Raymarine instruments i50, i60, i70 and MFD can connect via STng network. The analogue connections already made.

All the digital yacht and Maretron on a NMEA 2000 network then connect to STng with a Seatalk 1 to STng converter kit with a STng to NMEA200 cable.

ST2000+ to STng using the same Seatalk 1 to STng converter or connect to the NMEA bus then data should pass through the NMEA to STng converter...

Raymarine Smart controller with the Seatalk1 plug - Is this connected to the same yellow socket on the Seatalk 1 to STng converter (second converter required?) or how will I add this device

Any assistance greatly appreciated.