Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST5000
04-14-16, 09:43 AM
Post: #1
ST5000
I have a ST5000 that is making crazy 90 degree turns to port when I use my trim tabs, is there a wire that has been crossed or something else.
Also the unit with be in Auto then turn itself to stand by without anyone touching it, what would the cause of this be.

What can I check or replace to fix my issues.


Thanks
Find all posts by this user
Quote this message in a reply
04-14-16, 12:06 PM
Post: #2
RE: ST5000
What does the heading displayed on the ST5000 do when you use the trim tabs? Does it change?

When the autopilot goes from Auto to Standby without moving it, is usually due to lack of power to the autopilot. Check the voltage to the back of the ST5000 input.
Find all posts by this user
Quote this message in a reply
04-14-16, 08:44 PM
Post: #3
RE: ST5000
(04-14-16 12:06 PM)Steve - Raymarine - Moderator Wrote:  What does the heading displayed on the ST5000 do when you use the trim tabs? Does it change?

When the autopilot goes from Auto to Standby without moving it, is usually due to lack of power to the autopilot. Check the voltage to the back of the ST5000 input.

Thanks I will check the volts

as for the heading im not 100% sure but think it stayed the same, fishing Saturday and will check
Find all posts by this user
Quote this message in a reply
04-15-16, 10:50 AM
Post: #4
RE: ST5000
Let us know what you find.
Find all posts by this user
Quote this message in a reply
04-19-16, 06:46 AM
Post: #5
RE: ST5000
(04-14-16 08:44 PM)jaegergrady Wrote:  
(04-14-16 12:06 PM)Steve - Raymarine - Moderator Wrote:  What does the heading displayed on the ST5000 do when you use the trim tabs? Does it change?

When the autopilot goes from Auto to Standby without moving it, is usually due to lack of power to the autopilot. Check the voltage to the back of the ST5000 input.

Thanks I will check the volts

as for the heading im not 100% sure but think it stayed the same, fishing Saturday and will check

The heading stays the same when hitting the trim tabs, it changes once the course direction is in a different direction
Find all posts by this user
Quote this message in a reply
04-19-16, 10:04 AM
Post: #6
RE: ST5000
How about the voltage to the ST5000 when hitting the trim tabs?
Find all posts by this user
Quote this message in a reply
04-25-16, 03:46 PM
Post: #7
RE: ST5000
(04-19-16 06:46 AM)jaegergrady Wrote:  
(04-14-16 08:44 PM)jaegergrady Wrote:  
(04-14-16 12:06 PM)Steve - Raymarine - Moderator Wrote:  What does the heading displayed on the ST5000 do when you use the trim tabs? Does it change?

When the autopilot goes from Auto to Standby without moving it, is usually due to lack of power to the autopilot. Check the voltage to the back of the ST5000 input.

Thanks I will check the volts

as for the heading im not 100% sure but think it stayed the same, fishing Saturday and will check

The heading stays the same when hitting the trim tabs, it changes once the course direction is in a different direction

The volts are 13.3 when in auto also it is saying low batt but shows 13 volts
When hitting trim tab they drop to 11
The when engines are turning it drops to 10
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)