Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] How many devices can be fed by a Raymarine PoE Injector?
07-02-18, 01:27 PM (This post was last modified: 07-03-18 10:43 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] How many devices can be fed by a Raymarine PoE Injector?
I am installing an Axiom Pro network, and have the FLIR MD324 thermal camera that was previously connected to an e125.

I plan on installing a Cam220IP to monitor reverse operations.

Question- the FLIR camera is fed by its PoE injector. Can I also run the CAM220IP off the same injector, or should I run it off its own power supply and then to an HS5 switch?
Find all posts by this user
Quote this message in a reply
07-03-18, 10:48 AM (This post was last modified: 07-03-18 10:49 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] How many devices can be fed by a Raymarine PoE Injector?
Welcome to the Raymarine Forum Pau,

Q. Can I also run the CAM220IP off the same injector, or should I run it off its own power supply and then to an HS5 switch?
A. The POE injector is designed to supply power to a single device. FLIR's MD cameras are designed to be powered over Ethernet and a POE injector is included within the package of the MD324. A second POE injector may be purchased for the CAM220 or the CAM220 may instead be powered via it power leads. FLIR also offers a POE switch which may be used as an alternative to individual POE injectors.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-03-18, 11:01 AM
Post: #3
RE: [CA11] How many devices can be fed by a Raymarine PoE Injector?
Thank you! I suspected as much, and now have confirmation.

Pete
Find all posts by this user
Quote this message in a reply
07-03-18, 12:40 PM
Post: #4
RE: [CA11] How many devices can be fed by a Raymarine PoE Injector?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us