Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] NMEA 2000 cables
07-06-18, 01:37 PM (This post was last modified: 07-06-18 02:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] NMEA 2000 cables
Do the stng backbone and spur cables have standard NMEA 2000 male and female sockets? Does the STNG use the standard NMEA 2000 cable and connection protocol?
Find all posts by this user
Quote this message in a reply
07-06-18, 02:48 PM
Post: #2
RE: [CA11] NMEA 2000 cables
Welcome to the Raymarine Forum David,

When originally created, the NMEA 2000 standard did not specify a plug design. Accordingly, marine electronics manufacturers were free to design their own plug/socket designs. Over time, DeviceNet micro-C plugs/sockets seem to have been adopted by most marine electronics manufacturers. Raymarine's SeaTalkng networking components feature proprietary plugs and sockets. Raymarine offers adapter which may be used to adapt third party products to be interfaced to a NMEA 2000 backbone which has been constructed from SeaTalkng networking components.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us