Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Miracast with the Axiom Pro
11-19-19, 10:31 PM
Post: #34
RE: [TG11] Miracast with the Axiom Pro
Yes, the Wifi Alliance does show it as certified (assuming it's the same model number): https://www.wi-fi.org/product-finder-res...rds=amazon.

Turning electronics off does not mean no noise, unfortunately: RF interference can come from a surprisingly wide range of sources other than electronics - the one we're coming across most frequently nowadays is LED lighting. Another forum user recently reported crippling interference at AIS-band from his solar charge controllers as well, and I've seen it from 24-hour-powered TV antennas too. Unless the boat is electrically dead (including mobile and battery-powered devices being powered down) you can't completely rule out interference.

Can you use the RayRemote/RayControl apps reliably between the Axiom Pro and your phone/tablet? If not, your problem would appear to either be interference or a problem with the Axiom Pro. If you can, that suggests that the problem is the Fire Stick.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Miracast with the Axiom Pro - Tom - Raymarine - Moderator - 11-19-19 10:31 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)