Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Miracast with the Axiom Pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Miracast with the Axiom Pro
02-19-20, 10:53 PM
Post: #43
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] Miracast with the Axiom Pro
Hello DevoDave,

If they're that close and the connection is that unreliable then I think there's something else going on. In my working with it in our office environment - lots of electrical noise and other Wifi - I get a consistent, reliable connection over many hours at a range of 8-10m.

If you'd like our Service workshop to check your display, we would be happy to do that. You can get it back to us directly by booking it in at http://www.raymarine.com.au/service-and-...s-returns/, or you can get it back via your supplying dealer.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Miracast with the Axiom Pro - Tom - Raymarine - Moderator - 02-19-20 10:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication