[TG] [TG11] GA 150 and Axiom PRO 9" MFD compatibility
|
07-16-18, 07:35 PM
Post: #4
|
|||
|
|||
RE: [TG11] GA 150 and Axiom PRO 9" MFD compatibility
Cocoloco,
Whenever you connect any NMEA2000 devices, no matter how few (2), you always need a separately-powered, terminated backbone with spurs to each display. The simplest system would be an STNG Starter Kit with an STNG-Devicenet adaptor cable. Unless you were going to have a larger NMEA2000/STNG system (e.g. autopilot), I wouldn't go this way, I'd do the GA150. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] GA 150 and Axiom PRO 9" MFD compatibility - COCOLOCO - 07-12-18, 06:54 PM
RE: GA 150 and Axiom PRO 9" MFD compatibility - Tom - Raymarine - Moderator - 07-16-18, 03:16 AM
RE: [TG11] GA 150 and Axiom PRO 9" MFD compatibility - COCOLOCO - 07-16-18, 01:51 PM
RE: [TG11] GA 150 and Axiom PRO 9" MFD compatibility - Tom - Raymarine - Moderator - 07-16-18 07:35 PM
RE: [TG11] GA 150 and Axiom PRO 9" MFD compatibility - COCOLOCO - 07-16-18, 08:04 PM
RE: [TG11] GA 150 and Axiom PRO 9" MFD compatibility - Tom - Raymarine - Moderator - 07-16-18, 11:46 PM
|
User(s) browsing this thread: 3 Guest(s)