[TG] [TG11] Honda BF150, Axiom and eci 100

[Char05]

Dear Tom
first of all thank you for your help.
I do have a properley configured Nmea network on the motor side. The Axiom is connected with a T piece to the Nmea backbone.So far it works and I get data from the engine to display on the Axiom and Honda meters.

What bugs me If I go to settings in the Axiom there is a button detect engine. If I I push it there is an error message no engine detected.
On the motor display page the oil pressure left to the rpm meter is not displayed and
on the right side the motor temperature ist also empty.
I thought the eci 100 can read this data from the engine and it is detected properly. But it looks like I am wrong?
Thanks
Stefan