Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60+ Wind display
07-31-18, 01:06 PM (This post was last modified: 07-31-18 01:07 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] ST60+ Wind display
Welcome to the Raymarine Forum Marco,

The problem may indeed be indicative of a loose masthead, failing masthead, or failing wind instrument. After verifying that the masthead is securely fastened to its base, the masthead should be test. Please click here to view a FAQ addressing this subject. Should the masthead transducer test not indicate a problem with the transducer, then the fault would then be determined to be rooted within the ST60+ Wind Instrument. In the case of the latter, the ST60+ Wind Instrument would need to be replaced (typically with an i60 Wind), as Raymarine's Product Repair Center can no longer service ST60/ST60+ instruments. Should testing reveal a fault with the wind transducer, then the transducer should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST60+ Wind display - Marco@onyva - 07-31-18, 12:36 PM
RE: [CA11] ST60+ Wind display - Chuck - Raymarine - Moderator - 07-31-18 01:06 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)