[CA] [CA11] Ray70/Raymic
|
08-10-18, 03:28 PM
(This post was last modified: 08-16-18 02:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Ray70/Raymic
I have a new Ray70 and the RayMic. I've been having issues with the raymic going into "disconnect from base" and "connection rejected" messages. I've done a lot of trouble shooting on this. The radio and mic are new and have the updated software. The radio is on it's own power circuit with 15 amp breaker receiving 13.3 vdc. With the antenna disconnected, it works normally - no "error" messages. when I connect the antenna, I get the messages. I've disconnected the antenna coupling at the compression post and connected line to the radio and again get the messages. The cable doesn't show any shorts. I'm scratching my head pretty hard on this one.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Ray70/Raymic - tedmrt - 08-10-18 03:28 PM
RE: [CA11] Ray70/Raymic - Chuck - Raymarine - Moderator - 08-16-18, 02:32 PM
|
User(s) browsing this thread: 1 Guest(s)