Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Control "my boat" icon size, LH3
08-29-18, 12:53 PM (This post was last modified: 08-29-18 12:53 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Control "my boat" icon size, LH3
Welcome back to the Raymarine Forum Mark,

Within MFDs running LightHouse 3 software, holding one's finger pressed atop the vessel icon displayed within the Chart application will cause a Vessel Details context menu to be displayed. Selecting the Boat Symbol menu item listed will then permit the large, small outline, or teardrop vessel icons to be displayed at the vessel's location. Detailed information on this subject may be found within the Vessel Details subsection of Chapter 8.1: Chart app overview of the LightHouse 3.6 Advanced Operation Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Control "my boat" icon size, LH3 - Chuck - Raymarine - Moderator - 08-29-18 12:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)