Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Low voltage to itc5 for wind speed

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Low voltage to itc5 for wind speed
06-14-19, 12:41 PM
Post: #9
Terry L. Brabb Offline
Junior Member
**
 		Posts: 9
Joined: Feb 2016
Reputation: 0
RE: [CA11] Low voltage to itc5 for wind speed
Sorry for last msg. I found a 'T' with white wire to the EV-1 and the 2nd backbone end plug..

Still confuse about seatalk hs wiring. Currently there are 4 connections, one is 12v power, one is DSM300, one is radar and the last goes to the e125 mfd. Both the radar and DSM are working . Where is the wiring problem?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Low voltage to itc5 for wind speed - Terry L. Brabb - 06-14-19 12:41 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication