[CA] [CA11] Yamaha to Axiom Pro

[Chuck - Raymarine - Moderator]

Scott,

At this point, I would recommend that the ECI-100's software be reset. This is effectively accomplished by forcing the latest version of ECI-100 software to be installed into the ECI-100 again. To do so, extract the ray_Adapters_20171110.upgrade.iso alone from the downloaded LightHouse 3 v3.7.x compressed folder into the root level directory of a microSD memory card. Switch OFF the system's Data Master MFD, insert this microSD memory card into the MFD's memory card reader, and the switch the MFD ON.

Back up the Data Master MFD's data to a microSD memory card and then perform a Factory Reset. After the system re-boots and you have reconfigured the MFD with units and vessel detail, execute the Identify Engines feature again.