The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / MFD connection help

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD connection help
04-26-16, 07:50 AM
Post: #1
rltrbill Offline
Member
***
 		Posts: 75
Joined: Feb 2016
Reputation: 0
MFD connection help
System is as follows:
ES128 chirp DV connected
RD418HD
DSM300
Ray star 130 ext
Icom m412 connected for dsc

Having some issues with screen in MFD flickering intermittently. Not losing data, it picks up right where it left off but the screen flickers and goes out. It has been reconnected to another power source directly to main ground buss from house battery and power from house batt switch. Same issue.

Also the Raaystar isn't powering up nor showing up as connected.

It was installed by a Raymarine tech but something is up. Can you tell me how this should all be connected and tied together to work so I can double check all connections? Where these should all be going in the unit etc?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
MFD connection help - rltrbill - 04-26-16 07:50 AM
RE: MFD connection help - rltrbill - 04-26-16, 02:11 PM
RE: MFD connection help - rltrbill - 04-28-16, 11:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication