The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] A65 Compatability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A65 Compatability
09-29-18, 02:06 AM (This post was last modified: 10-01-18 10:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
morepower Offline
Member
***
 		Posts: 54
Joined: Jul 2018
Reputation: 0
[CA11] A65 Compatability
Hi, I currently have a RC530 Plus plotter with RS125 gps linked into my 230e VHF/Depth/Speed/Flux gate compass/High speed heading using the sea talk connection...(I've not connected the NEMA 0183 as I don't have an autopilot yet)
I'm looking at upgrading my plotter to a newer Raymarine A65 but notice that this unit only has a NEMA input...
Am I correct in thinking that I could connect this to the smart heading units NEMA output and receive depth/speed etc through this.

Kind Regards

TIm
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] A65 Compatability - morepower - 09-29-18 02:06 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication