Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] smartpilot s3
10-24-18, 06:36 AM (This post was last modified: 10-24-18 06:37 AM by Derek - Raymarine - Moderator.)
Post: #16
RE: [DG] smartpilot s3
Hi ricardomann,

the Spu cable used to connect the E22158 converter to the SeaTalk network needs to have the red 12v core cut and isolated.
The picture below shows the modification, which for safety should then be covered in heatshrink sleeving.

[Image: attachment.php?aid=2385]

this will prevent power from the SeaTalk network powering the converter and the converter will then only take it's power from STng.

regards
Derek


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] smartpilot s3 - ricardomann - 10-03-18, 04:05 PM
RE: [DG] smartpilot s3 - ricardomann - 10-04-18, 03:04 PM
RE: [DG] smartpilot s3 - ricardomann - 10-07-18, 01:08 PM
RE: [DG] smartpilot s3 - ricardomann - 10-09-18, 11:09 AM
RE: [DG] smartpilot s3 - ricardomann - 10-17-18, 05:40 PM
RE: [DG] smartpilot s3 - angel3890 - 10-11-18, 01:37 PM
RE: [DG] smartpilot s3 - ricardomann - 10-12-18, 01:24 PM
RE: [DG] smartpilot s3 - ricardomann - 10-23-18, 01:17 PM
RE: [DG] smartpilot s3 - Derek - Raymarine - Moderator - 10-24-18 06:36 AM
RE: [DG] smartpilot s3 - ricardomann - 01-16-19, 06:15 PM
RE: [DG] smartpilot s3 - ricardomann - 01-18-19, 08:56 AM
RE: [DG] smartpilot s3 - ricardomann - 01-21-19, 07:14 AM
RE: [DG] smartpilot s3 - ricardomann - 01-21-19, 09:22 AM
RE: [DG] smartpilot s3 - ricardomann - 01-21-19, 09:33 AM
RE: [DG] smartpilot s3 - ricardomann - 01-21-19, 08:14 PM
RE: [DG] smartpilot s3 - ricardomann - 01-22-19, 10:31 AM
RE: [DG] smartpilot s3 - ricardomann - 01-22-19, 10:46 AM
RE: [DG] smartpilot s3 - ricardomann - 01-22-19, 02:21 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)