[CA] [CA11] Legacy MFD Engine Data Connection

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum glovernw,

The ECI-100 should be interfaced to the available port in the Yamaha Command Link network in the manner specified within the documentation found here. A simple SeaTalkng / NMEA 2000 backbone will need to be constructed for the marine electronics side of the ECI-100. The ECI-100 will be connected to one of the backbone's spur sockets via an appropriate length of SeaTalkng Spur Cable. The SeaTalk2/NMEA 2000 socket of the E-Series Classic MFD will be interfaced to the remaining spur socket via an A06061 SeaTalkng Spur to E-Series Classic MFD Adapter Cable.