[CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems

01-04-19, 06:00 PM

Post: #4

tomlyng Offline

Junior Member

Posts: 6
Joined: Jan 2018
Reputation: 0

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems

I realize and am OK that the AIS will not be on the old PathFinder MFD.
I am only keeping the old PathFinder MFD for radar and backup.

Please review my attached new schematic and see if it is OK.
I replace the converter with a Actisense NGW-1-ISO-STNG and a 5-way connector and powered up the SeaTalkNG backbone. I also put a resistor on the backbone as I need the space on the 5-way connector.

If this doesn't work, I could separate the old and the new systems other than I want the navigation (autopilot) on the new system.

Attached File(s)
.pdf

Raymarine Electric Schematic 1-3-2019.pdf (Size: 39.38 KB / Downloads: 210)

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 12-29-18, 12:03 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - Chuck - Raymarine - Moderator - 12-31-18, 11:29 AM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 01-03-19, 07:52 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 01-04-19 06:00 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - Chuck - Raymarine - Moderator - 01-07-19, 09:23 AM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 01-08-19, 08:16 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - Chuck - Raymarine - Moderator - 01-09-19, 08:38 AM

User(s) browsing this thread: 1 Guest(s)