Raymarine forum / Raymarine Forums / Radar v / Radar -- no data source followed by operation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radar -- no data source followed by operation
05-18-16, 06:06 PM (This post was last modified: 05-25-16 03:46 PM by Chuck - Raymarine - Moderator.)
Post: #3
michaellutz Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2016
Reputation: 0
RE: Radar -- no data source followed by operation
I am not talking about the scanner warmup period. The variable delay when it reads out no data source occurs before the message for the scanner warmup time. This delay can be a few seconds to many minutes.

Radome is I think eighteen inch diameter closed purchased from W. Marine in December of 2008. Do not know if it is analog or digital. Checked plug at back of my E-120 (not wide) and splices at base of mast and all are clean, dry, and perfect.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Radar -- no data source followed by operation - michaellutz - 05-18-16 06:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication