Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Automatically triggering MOB alarm when OceanSignal MOB1 is activated

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Automatically triggering MOB alarm when OceanSignal MOB1 is activated
01-08-19, 03:40 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Automatically triggering MOB alarm when OceanSignal MOB1 is activated
Welcome to the Raymarine Forum InsuredApple,

Raymarine's MFDs operating with the latest LightHouse II and LightHouse 3 software (v19.3 and v3.7.70 respectively at the time of this response) were designed to support plotting of AIS SARTs when interfaced to a compatible AIS receiver or transceiver (ex. AIS350, AIS650, AIS700, Ray70 w/AIS option, etc.). While such AIS SARTs may be plotted by the MFD, they may not trigger MOBs within the Raymarine system featuring MFDs running LightHouse II or LightHouse 3 software. Within the software versions specified, MOBs may only be triggered by manually commanding a MOB event through the MFD's user's interface.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Automatically triggering MOB alarm when OceanSignal MOB1 is activated - Chuck - Raymarine - Moderator - 01-08-19 03:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication