Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] adding DSM300 to C80
01-09-19, 10:56 AM (This post was last modified: 01-09-19 12:51 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] adding DSM300 to C80
GOOD MORNING

I have a C80 and I am looking to connect a DSM300. I have a depth/temp. transducer connected to my smart craft gauges Mercruiser part # 888828B2 My question is can I use this transducer for the DSM300 and keep it connected to the smartcraft gauges

thank you
Find all posts by this user
Quote this message in a reply
01-09-19, 12:55 PM (This post was last modified: 01-09-19 04:03 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] adding DSM300 to C80
Welcome to the Raymarine Forum G,

It is not possible to use the currently installed depth transducer from the SmartCraft system with a DSM300. The DSM300 was designed to be interfaced to the same set of fishfinder transducers which are designed for use with the CP370.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-09-19, 03:49 PM (This post was last modified: 01-09-19 03:51 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] adding DSM300 to C80
is there a transducer that has temp/depth combined that I can use? and will airmar transducer work with the set up
Find all posts by this user
Quote this message in a reply
01-09-19, 04:03 PM (This post was last modified: 01-09-19 04:08 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] adding DSM300 to C80
G,

Should you click on the link provided within my initial response, it will open the web page of compatible transducers. There you will see tabs titled "Depth & Temperature" and "Depth, Speed & Temperature". Clicking on those tabs will list the compatible transducers having these features, their part numbers, an specifications. If considering use of an Airmar branded transducer with a DSM300, then it would be recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted for information concerning compatible Airmar transducers.
Visit this user's website Find all posts by this user
Quote this message in a reply
01-09-19, 04:06 PM (This post was last modified: 01-09-19 04:07 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] adding DSM300 to C80
Ok Thank You, Chuck
Find all posts by this user
Quote this message in a reply
01-09-19, 04:07 PM
Post: #6
RE: [CA11] adding DSM300 to C80
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us