[CA11] a75, NMEA 183 and Seatalk1 integration

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] a75, NMEA 183 and Seatalk1 integration

01-16-19, 12:07 PM (This post was last modified: 01-16-19 04:17 PM by Chuck - Raymarine - Moderator.)

Post: #3

gusigle Offline

Junior Member

Posts: 3
Joined: Mar 2017
Reputation: 0

RE: [CA11] a75, NMEA 183 and Seatalk1 integration

Thank you, Chuck.
I guess I was wrong, but reading p 57 (RAY_a-c-e Series_ESP, chapter 4.13, image attached), I thought it would be possible to connect gx2200 to the A series MFD whithout a bridging device, sending DSC and AIS data from vhf to MFD (one direction only). So, this is not possible, isn't it?
Another question: is there any diference between the 5 way connectors included in E22158 and E70196 kits? Is the same R52131 in both kits?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] a75, NMEA 183 and Seatalk1 integration - gusigle - 01-15-19, 01:50 PM

RE: [CA11] a75, NMEA 183 and Seatalk1 integration - Chuck - Raymarine - Moderator - 01-15-19, 02:07 PM

RE: [CA11] a75, NMEA 183 and Seatalk1 integration - gusigle - 01-16-19 12:07 PM

RE: [CA11] a75, NMEA 183 and Seatalk1 integration - Chuck - Raymarine - Moderator - 01-16-19, 04:26 PM

RE: [CA11] a75, NMEA 183 and Seatalk1 integration - gusigle - 01-16-19, 10:49 PM

RE: [CA11] a75, NMEA 183 and Seatalk1 integration - Chuck - Raymarine - Moderator - 01-17-19, 08:55 AM

User(s) browsing this thread: 1 Guest(s)