Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A128 Transducer Question
05-04-16, 09:52 AM
Post: #4
RE: A128 Transducer Question
Scott,

Q1. Can I use the DSM 300 I have between my A128 and a chirp transducer?
A1. Negative. The DSM300, DSM30, CP300, and CP370 are exclusively designed for use with compatible fixed frequency 50/200 kHz transducers such as those found here ... they cannot be interfaced to CHIRP transducers.

Q2. What would give me the best performance searching the bottom at the depth I noted above?
• Use the CPT 120 direct to the A1128? OR
• Add a CP370 and a 600 to 1000 watt chirp transducer?
I am also strongly considering to retain the DSM 300 and the current Airmar transducer connected to my new A128 for use as a straight sonar view.
A2. For this application, is recommended that the CPT-120 be used and that it be directly mated to the ax8 MFD's transducer socket.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
A128 Transducer Question - scottor - 05-02-16, 11:56 PM
RE: A128 Transducer Question - scottor - 05-03-16, 11:54 PM
RE: A128 Transducer Question - Chuck - Raymarine - Moderator - 05-04-16 09:52 AM
RE: A128 Transducer Question - scottor - 05-06-16, 03:25 PM
RE: A128 Transducer Question - scottor - 05-06-16, 03:41 PM
RE: A128 Transducer Question - scottor - 05-06-16, 03:55 PM
RE: A128 Transducer Question - scottor - 05-07-16, 12:04 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)