[DG] [DG11] Evolution Autopilots - Legacy Rudder Reference

[Derek - Raymarine - Moderator]

Dear LimaBravo,
Thank you for your enquiry,

The Raymarine autopilots require an analogue rudder angle input based on a centre tapped potentiometer, this requires 3 wires, one from each end of the potentiometer resistor and one from the 'wiper' which moves with the rudder angle and changes the resistance of the sensor. The Robertson transducer that you have will not work.

The Attached FAQ, accessed here gives more information about the specifics of the Raymarine Rudder reference unit

Regards
Derek