[CA] [CA11] Integrating Garmin GPS into Seatalk 1 network

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mark,

Please note that no diagram has been attached to your thread. That said, as the 74CV features a NMEA 0183 output port, it would typically be advised that the 74CV's NMEA 0183 output port be interfaced to the S2's NMEA 0183 input port or to the NMEA 0183 input port of the ST6001 autopilot control head. When so interfaced, the autopilot's Track mode feature may used after having commanded the chartplotter to go to a waypoint / cursor position or to follow a route.