Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 9: LightHouse 3 V3.8.97 reboot and network problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9: LightHouse 3 V3.8.97 reboot and network problem
02-01-19, 02:29 PM (This post was last modified: 02-01-19 03:25 PM by Chuck - Raymarine - Moderator.)
Post: #3
paler Offline
Junior Member
**
 		Posts: 7
Joined: Sep 2018
Reputation: 0
RE: [CA11] Axiom 9: LightHouse 3 V3.8.97 reboot and network problem
Thank you Chuck.

There is no Y cable. The RV-100 transducer plugs straight into the Axiom RV and shares the data via Raynet with the non sonar Axiom.

It is working fine (on the trailer) with LightHouse 3 v3.7.70 software. Will sea trial this weekend and may upgrade once confirmed that the both units are performing correctly.

Is it necessary to remove the Ethernet network while updating software via SD card?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9: LightHouse 3 V3.8.97 reboot and network problem - paler - 02-01-19 02:29 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication