Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading system
05-13-16, 07:24 AM
Post: #11
RE: Upgrading system
Tom,

It's unclear why you have attached the DSM300G's barcode label to this thread.
Visit this user's website Find all posts by this user
05-13-16, 10:43 AM
Post: #12
RE: Upgrading system
Sorry that was my fault. Wanted you to have the serial number of the DSM300 that won't power up. I can send a pic of the status light as well. I went through the procedure that you listed earlier and still no go. Thanks! Tom.
Find all posts by this user
05-13-16, 12:10 PM (This post was last modified: 05-13-16 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #13
RE: Upgrading system
Tom,

Per the previously referenced FAQ, should you have addressed the troubleshooting items specified therein and a problem persists, then the DSM should be sent to Raymarine’s Product Repair Center to be bench checked.
Visit this user's website Find all posts by this user
05-13-16, 01:07 PM
Post: #14
RE: Upgrading system
Again. Many thanks! Tom
Find all posts by this user
05-13-16, 01:18 PM
Post: #15
RE: Upgrading system
You're welcome.
Visit this user's website Find all posts by this user
05-24-16, 01:34 PM
Post: #16
RE: Upgrading system
Hi Chuck, can I mix a ES127 with a ES128 and potentially use both styles of sounders??
Find all posts by this user
05-24-16, 02:15 PM
Post: #17
RE: Upgrading system
Tom,

It is indeed possible to do as you have suggested. Onboard my own boat, I operate a 600W 50/200kHz conical sounding (via e7D), CHIRP conical / DownVision (via a78), SideVision (via CP200), and 1kW 50/200kHz conical sounding (via DSM300) all within a single networked system of a/c/e/eS/gS-Series MFDs.
Visit this user's website Find all posts by this user
05-24-16, 02:49 PM
Post: #18
RE: Upgrading system
Very cool. Again you are an excellent resource! Tom
Find all posts by this user
05-24-16, 02:57 PM
Post: #19
RE: Upgrading system
You're welcome.
Visit this user's website Find all posts by this user
06-01-16, 10:07 AM
Post: #20
RE: Upgrading system
Hi Again Chuck, I just ordered a ES127 and a ES128. I am also changing out the Clarion CMD5 to the Fusion so I can use the Raymarine/Fusion functionality. What is the easiest way to connect the SeaTalk HS to NMEA2000 (cables etc)? Thanks again!
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us