[CA] [CA11] Raymarine CP470 and Airmar M260
|
02-25-19, 10:44 AM
Post: #2
|
|||
|
|||
RE: [CA11] Raymarine CP470 and Airmar M260
Welcome to the Raymarine Forum thecatch22,
Unfortunately, 50kHz/200kHz transducers (ex. those which were designed to be interfaced to a CP370, CP300, DSM300, or DSM30) cannot be adapted to be interfaced to a CP470 CHIRP Sounder Module. M260 is a name given to a family of 50kHz/200kHz transducers produced by Airmar which each featured unique circuitry to accommodate use with a specific marine electronics manufacturer's fishfinding product(s). Should the M260 have been designed for use Raymarine products, then it would typically be recommended that it be interfaced to a CP370 1kW 50kHz/200kHz Sounder Module. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Raymarine CP470 and Airmar M260 - thecatch22 - 02-25-19, 09:23 AM
RE: [CA11] Raymarine CP470 and Airmar M260 - Chuck - Raymarine - Moderator - 02-25-19 10:44 AM
RE: [CA11] Raymarine CP470 and Airmar M260 - thecatch22 - 02-25-19, 10:58 AM
RE: [CA11] Raymarine CP470 and Airmar M260 - Chuck - Raymarine - Moderator - 02-25-19, 11:53 AM
RE: [CA11] Raymarine CP470 and Airmar M260 - thecatch22 - 02-25-19, 12:01 PM
RE: [CA11] Raymarine CP470 and Airmar M260 - Chuck - Raymarine - Moderator - 02-25-19, 12:17 PM
RE: [CA11] Raymarine CP470 and Airmar M260 - thecatch22 - 02-25-19, 01:48 PM
RE: [CA11] Raymarine CP470 and Airmar M260 - Chuck - Raymarine - Moderator - 02-25-19, 02:05 PM
|
User(s) browsing this thread: 1 Guest(s)