Raymarine forum / Raymarine Forums / Networking / System Integration v / [DG] [DG11] Adding an RMK10 to two axioms - switch not powering on

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Adding an RMK10 to two axioms - switch not powering on
03-04-19, 11:50 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] Adding an RMK10 to two axioms - switch not powering on
Hi Wstandis,

Thankyou for your enquiry,

It looks like you have power to the remote keypad, by virtue of the power button illuminated, have you also tried to pair the keypad with the displays?

Note that when you reconnect the RMK10 via the HS%, you will need to repair the keypad again - did you do that?

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-04-19 11:50 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication