Raymarine forum / Raymarine Forums / Networking / System Integration v / [DG] [DG11] Adding an RMK10 to two axioms - switch not powering on

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Adding an RMK10 to two axioms - switch not powering on
03-05-19, 08:58 AM (This post was last modified: 03-05-19 09:43 AM by Derek - Raymarine - Moderator.)
Post: #5
Wstandis Offline
Junior Member
**
 		Posts: 15
Joined: Jul 2017
Reputation: 0
RE: [DG11] Adding an RMK10 to two axioms - switch not powering on
Sorry. I should have made my answer clear.

No it did not work. I hooked the switch up to the axiom. Works fine. Power down and connect to network switch and try to pair. Keyboard not found.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-05-19 08:58 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication