[DG11] Adding an RMK10 to two axioms - switch not powering on

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Adding an RMK10 to two axioms - switch not powering on

03-05-19, 09:48 AM

Post: #6

Derek - Raymarine - Moderator Offline

Administrator

Posts: 1,416
Joined: Nov 2017
Reputation: 9

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on

Hi Wstandis

Thanks for clarifying this, try disconnecting everything from the HS5 switch except one AXIOM display and the RMK10, if still an issue, then try fitting a cross over coupler between the RMK10 and the HS5.

Thanks
Derek

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-02-19, 11:58 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-04-19, 11:50 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-04-19, 07:25 PM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-05-19, 05:06 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-05-19, 08:58 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-05-19 09:48 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-05-19, 02:42 PM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-06-19, 06:36 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-06-19, 12:13 PM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-07-19, 05:41 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Wstandis - 03-09-19, 09:21 AM

RE: [DG11] Adding an RMK10 to two axioms - switch not powering on - Derek - Raymarine - Moderator - 03-11-19, 10:55 AM

User(s) browsing this thread: 1 Guest(s)