[CA11] Installing Navionics Platinum+ to G-Series MFD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Installing Navionics Platinum+ to G-Series MFD

03-20-19, 07:44 AM

Post: #7

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD

Kevin,

I doubt that the problem is an incompatibility between the tracks feature and Navionics cartography ... this would be the first time that I have ever heard of this issue being reported in conjunction with the GPM400 or any other MFD for that matter. I suspect that the problem is most likely due to a problem within the settings. I would recommend once again performing a System Settings and Data Reset operation to address the reported condition.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-08-19, 01:56 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-08-19, 02:36 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-19-19, 02:24 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-19-19, 02:38 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-19-19, 06:04 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-20-19 07:44 AM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-20-19, 12:08 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 03-20-19, 12:35 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 04-01-19, 02:02 PM

RE: [CA11] Installing Navionics Platinum+ to G-Series MFD - Chuck - Raymarine - Moderator - 04-01-19, 02:41 PM

User(s) browsing this thread: 1 Guest(s)