Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly
03-23-19, 12:19 AM (This post was last modified: 03-25-19 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #5
Type1 Offline
Junior Member
**
 		Posts: 27
Joined: Feb 2019
Reputation: 0
RE: [CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly
Just to further clarify, we experience ineffective button pushes during the multiple menu selection actions (not commands) which are necessary to re-activate the VRM/EBL using the hard buttons and rotary dial after ranging out and in. There doesn't appear to be any other way to accomplish this basic action. Using touchscreen commands there doesn't appear to be any latency, however we don't operate in touchscreen mode. Is this something that could be addressed in a future software upgrade? Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro - OK Button on Rotary Dial Not Working Properly - Type1 - 03-23-19 12:19 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication