Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Replacing C90W with Axion MFD
03-21-19, 03:38 PM (This post was last modified: 03-25-19 12:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Replacing C90W with Axion MFD
Replacing cockpit and Nav station C90W with Axiom 7 on Swan 40. Cable conduits are full, and cannot pull Raynet ends through. I can use the existing 14/2 power supplies for the new MFDs. Can I use the existing, good condition, HS cable, and splice in the RayNet cable ends ?
Find all posts by this user
Quote this message in a reply
03-25-19, 12:23 PM
Post: #2
RE: [CA11] Replacing C90W with Axion MFD
Welcome to the Raymarine Forum Limestone45,

Please click here to view a FAQ addressing this subject. The power leads of the Axiom MFD Power/NMEA 2000 Cables may be splice to the currently installed 14-2 power cable which is currently supplying powering the Widescreen MFDs. As indicated within the referenced FAQ, adapter are available to permit the currently installed SeaTalkhs Cable to be re-purposed.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us