[CA11] Depth over 100M goes back to Zero not ---

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Depth over 100M goes back to Zero not ---

04-10-19, 03:37 PM (This post was last modified: 04-10-19 03:37 PM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Depth over 100M goes back to Zero not ---

Welcome to the Raymarine Forum Sv Flip-Flops,

I'm not aware of a P19 transducer which outputs NMEA 0183 or which may be interfaced to a SeaTalk to SeaTalkng Converter. What make/model product is the P19 transducer's cable directly connected to?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-10-19, 11:46 AM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-10-19 03:37 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-15-19, 09:45 AM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-15-19, 03:29 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-15-19, 04:06 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-16-19, 03:41 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-16-19, 06:04 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-17-19, 08:53 AM

User(s) browsing this thread: 1 Guest(s)