[CA11] Depth over 100M goes back to Zero not ---

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Depth over 100M goes back to Zero not ---

04-15-19, 03:29 PM

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Depth over 100M goes back to Zero not ---

Sv Flip-Flops,

The Airmar part number which provided within your previous response, 31-188-4-01, corresponds to Raymarine's M78713 P19 Instrument Depth Transducer. This transducer does not support NMEA 0183. Instead, this is an analog instrument depth transducer which is designed to be interfaced to the depth transducer terminals of a Raymarine depth sounding instrument product (ex. iTC-5, i50 Depth, ST60 Depth, ST290/70 Depth Pod, ST50 Depth, etc.). What model of Raymarine product is your P19 instrument depth transducer connected directly to?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-10-19, 11:46 AM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-10-19, 03:37 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-15-19, 09:45 AM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-15-19 03:29 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-15-19, 04:06 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-16-19, 03:41 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Sv Flip-Flops - 04-16-19, 06:04 PM

RE: [CA11] Depth over 100M goes back to Zero not --- - Chuck - Raymarine - Moderator - 04-17-19, 08:53 AM

User(s) browsing this thread: 1 Guest(s)