[CA] [CA11] Axiom Pro 9 not providing SOG over NMEA 2000 bus

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum tmarks11,

Great diagram! Please note that a vessel which is not moving will have no valid COG or SOG. When these data items are displayed with the system, it would be expected that their values should be dashed under such conditions. The MFD's NMEA Setup screen is not intended to support configuration of data transmitted to the system's SeaTalkng / NMEA 2000 backbone. All data within the list of supported NMEA 2000 PGNs will be transmitted if the data required to populate the corresponding PGN is available to the MFD. The MFD's NMEA Setup screen is intended to support configuration of data transmitted from the MFD's NMEA 0183 communications interface. It is recommended that the Data Sources feature (MENU->SET-UP->SYSTEM SET-UP->DATA SOURCES) of the i70S MFID be used to configure the system to use the MFD as the system's data source for GPS Position (includes COG/SOG), GPS Datum, and Date & Time.