Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro 9 not providing SOG over NMEA 2000 bus

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro 9 not providing SOG over NMEA 2000 bus
04-23-19, 07:14 PM (This post was last modified: 04-24-19 07:53 AM by Chuck - Raymarine - Moderator.)
Post: #3
tmarks11 Offline
Junior Member
**
 		Posts: 8
Joined: Sep 2018
Reputation: 0
RE: [CA11] Axiom Pro 9 not providing SOG over NMEA 2000 bus
[quote='Chuck - Raymarine - Moderator' pid='28708' dateline='1556041055']
Please note that a vessel which is not moving will have no valid COG or SOG.[\quote]

The boat was moving... see attached photo with 4.1 kts STW, "---" for SOG.

Quote:It is recommended that the Data Sources feature (MENU->SET-UP->SYSTEM SET-UP->DATA SOURCES) of the i70S MFID be used to configure the system

I set it up that way originally with my Garmin 441. I went back and attempted to change that, and the only choices for "SPEED" was "AUTO" and "ITC-5". Selecting "AUTO" still gave me no SOG.

I will go back and double-check that next time I am at my boat.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro 9 not providing SOG over NMEA 2000 bus - tmarks11 - 04-23-19 07:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication