Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Axiom Pro S Depth Options
05-07-19, 10:32 AM (This post was last modified: 05-07-19 10:47 AM by Derek - Raymarine - Moderator.)
Post: #4
RE: [DG11] Axiom Pro S Depth Options
Hi neflier,

You will find it useful to read through this FAQ which describes the STng network, location of terminators, rules for NME 2000 configuration, ( for example a spar can be up to 6m long which might be a better way to connect the network to the AXIOM in the Navpod instead of leading the backbone up there and terminating it).

Please use the STng to NMEA2000 cable - A06075 instead of trying to make your own cable, we have so many reports of system errors triggered by self -fit connectors and they can be difficult to track down in a large network.

Pinouts for the Female St50 connector [Image: attachment.php?aid=2978]

With regards to the power draw, the Axiom PRO will draw less than 50mA when it is powered down, but not isolated. I will check for the specific value and update.
Thanks
Derek


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] Axiom Pro S Depth Options - Derek - Raymarine - Moderator - 05-07-19 10:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)