Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46
09-13-19, 08:01 AM (This post was last modified: 09-16-19 08:24 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46
ChilliHeat,

Thanks for the additional feedback. Please note that the processing demands of LH3 are significantly greater than those of LHII. Accordingly, it is recommended that one proceed with the update of a system of eS/gS-Series MFDs to LH3 only with the understanding that performance may appear to be degraded when compared to the performance of LHII on those same MFDs. Should the performance of the system following the update to LH3 not meet one's need, then it would be recommended that the system of eS/gS-Series MFDs be downgraded to LHII. This is particularly so for those whose systems do not include Axiom/Axiom Pro/Axiom XL MFDs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade failure es128 Lighthouse 3 v3.9.46 - Chuck - Raymarine - Moderator - 09-13-19 08:01 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)