Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Cable Length too short?
04-30-19, 11:10 AM (This post was last modified: 04-30-19 03:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Cable Length too short?
Not sure if this has been brought up before in a previous thread.

I'm sure I'm not the first person to run into this problem but I found a nice solution.

If you want to connect your Axiom to a Seatalk ng backbone using the Devicenet to Seatalkng cable (A06075) but it's not long enough you can build your own!

Get a Raymarine Snap on Spur Adapter (A06082) then you can use a longer spur cable to make up any distance you're short.
Find all posts by this user
Quote this message in a reply
04-30-19, 04:02 PM
Post: #2
RE: [CA11] Axiom Cable Length too short?
Welcome to the Raymarine Forum Zinger,

Thanks for the tech tip regarding these recently introduced adapters for SeaTalkng Spur Cables. For those seeking additional information on this subject, Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us