[DG] [DG11] Type 100 Drives to STBD, not PORT

[Derek - Raymarine - Moderator]

Hi Keith,

The two Thick wires on the left of the connector block are the main power into the computer, the two thinner wires on the right are the drive motor wires.

The two 'metal-looking openings' o the top of the connector block are indeed metal and will be live, so you can temporarily 'dab' the thinner wires onto the metal surface.

In fact to remove the motor wires from the connector, you will need to insert a flat bladed screwdriver into the top of the connector blocks and push down on the metal surface quite hard to open the connector 'jaws' and release the wires.
Be careful not to short any of the wires as this could have terminal effects on the computer!

Regards
Derek