Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Problems with v3.9.46

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Problems with v3.9.46
07-21-19, 10:09 PM
Post: #14
karlista Offline
Junior Member
**
 		Posts: 49
Joined: Dec 2017
Reputation: 0
RE: [CA11] Problems with v3.9.46
Chuck, this weekend I installed v3.10 and then successfully performed a power on reset. I did not reload my way points. I am still getting the same "invalid command" message on the Axiom Pro RVX 12 when I try to switch auto pilot mode from track to power steering. Interesting, when I turn off the Axiom Pro RVX 12, then I can successfully switch auto pilot mode from track to power steering. What do I do now?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Problems with v3.9.46 - karlista - 05-18-19, 10:59 PM
RE: [CA11] Problems with v3.9.46 - karlista - 07-21-19 10:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication