[DG] [DG11] Ev-100 tillerpilot on OE-32

[Derek - Raymarine - Moderator]

Hi Bjarni,

Thankyou for your enquiry,

the mounting of the tiller drive onto a boat with a canoe stern can be difficult because the geometry of the installation is very important.

I have attached a picture which shows the mounting for the drive on the Gunwhale of the boat, it means the drive is quite exposed, but this can work very well.



The key is to maintain the correct distance from the centreline of the rotational axis of the rudder pintles, and to ensure there is equal stroke either side of 'midships, making sure the drive unit is angled at 90 degrees to the tiller.



Kind regards
Derek