[DG] [DG11]Windspeed values incorrect, too low, after some time, especially with more wind

[Derek - Raymarine - Moderator]

Hi Sogin,

Thanks - so basically the issue is most likely the masthead Tx or the wind pod into which the masthead unit is connected. Replace the wind pod and recheck the voltages again, however, the voltages that you measured suggest there is a problem with the blue to screen cable at least and so you should get the masthead unit down from the top of the mast, and test the masthead unit direct with a short test cable - there is a link in the earlier thread to help make this cable.

regards
Derek