[CA11] SPX 30 and ST8001

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] SPX 30 and ST8001

06-21-19, 04:20 PM (This post was last modified: 06-24-19 08:43 AM by Chuck - Raymarine - Moderator.)

Post: #3

Walthoover Offline

Junior Member

Posts: 3
Joined: Jun 2019
Reputation: 0

RE: [CA11] SPX 30 and ST8001

Hello, it's wired directly from the seatalk terminals on the SPX 30 to the 8001. Then a seatalk wire from the SPX 30 to my seatalk bus. The red power is not connected as per the Installation manual.

Thanks

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] SPX 30 and ST8001 - Walthoover - 06-11-19, 08:14 AM

RE: [CA11] SPX 30 and ST8001 - Chuck - Raymarine - Moderator - 06-12-19, 12:22 PM

RE: [CA11] SPX 30 and ST8001 - Walthoover - 06-21-19 04:20 PM

RE: [CA11] SPX 30 and ST8001 - Chuck - Raymarine - Moderator - 06-24-19, 09:01 AM

RE: [CA11] SPX 30 and ST8001 - Walthoover - 06-25-19, 09:04 AM

RE: [CA11] SPX 30 and ST8001 - Chuck - Raymarine - Moderator - 06-25-19, 09:28 AM

User(s) browsing this thread: 1 Guest(s)