[CA] [CA11] Quantum — Quantum 2

[E.hatch2086@cox.net]

new info. With Quantum hooked up yo my Axiom and with all the latest updates installed motored about 12 miles radar on just before we got to destination about 13/4 hours the rada stopped no radar image on chart overlay or on the radar app. Radar app displayed th on button only. This is just like I reported previously. Took about 10 to 15 minutes to get radar to come back up . So I changed net cable and connected rada to my ES7 chart plotter vintage 2015 running the latest lighthouse 2 software. On mooring radar started up. The next day turned on radar and started journey home. Engine as well as gent running. I had a digital voltmeter hooked up to the radar power supply it was showing about 13.7 to 13.9 volts for the entire journey. After about 1 hour and 40minutes rada stoped displaying image and it said no radar. Tried to restart it but could not get it started till we had docked. Any more thoughts based on this.

At dock radar stayed running for about 5 hours till I shut he Quantum 2 and Down and switched the network cable back to the Axiom

Then I took the Axiom apart to get to the micro card and installed a new card with the previous version of the software 3.8.105.
Previous update installed successfully. Then started radar up and it came on. Of cause this proves nothing yet as issue seems time dependent away from dock.

Should I now reinstall the latest quantum 2 updates and quantum adapter updates even though they are apparently there then reinstall the latest Axiom softwares?

When I have the Quantum 2 connected to the ES7 with lighthouse 2 are the radar and adapter software the same as on the Axiom