Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Trunnion alternatives for c/e 12x series
07-01-19, 10:30 AM (This post was last modified: 07-17-19 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Trunnion alternatives for c/e 12x series
Looking to replace my two current trunnion mounted classic E120s with 12" c/e series but the 12" trunnion mounts for c/e (R70356) has been discontinued. Called Raymarine and was told no stock, and I can't find any on line. Two of the refurb c125s would do nicely if I can find a trunnion mount option as I have a CP370, radar etc that should work nicely with the c215. Any Alternatives? Suspect the current E120 classic mounts won't be a fit. Thanks for your suggestions.
Find all posts by this user
Quote this message in a reply
07-10-19, 05:06 AM (This post was last modified: 07-17-19 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Trunnion alternatives for c/e 12x series
Hello QBFlyer,

The c/e12 are different sizes from other MFDs and won't quite fit their brackets. I expect you could get the (metal) bracket from another display model and adapt it, but personally I think I'd get a simple metal U-bracket made up from the dimensions in the CAD drawings which you can download from https://raymarine.app.box.com/s/8o1sxspk...2382489717 (raymarine.com > Support > Manuals and Documents > MFDs > a/c/e-Series)

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia
Visit this user's website Find all posts by this user
Quote this message in a reply
07-16-19, 03:19 PM (This post was last modified: 07-17-19 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] Trunnion alternatives for c/e 12x series
Thanks for the advice. Much appreciated.
Find all posts by this user
Quote this message in a reply
07-17-19, 07:53 AM
Post: #4
RE: [TG11] Trunnion alternatives for c/e 12x series
Noted
Visit this user's website Find all posts by this user
Quote this message in a reply
07-17-19, 03:15 PM
Post: #5
RE: [TG11] Trunnion alternatives for c/e 12x series
I cut one of the newer metal brackets for a 125 and sized them to fit. Add the correct pucks and it looks and works beautiful. Instead of the crappy knobs that come with the c125 I used a stainless bolt and washers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us